Dns; Dns Client - Zhone zNID-GPON-2402 Configuration Manual

Management

DNS

34
zNID 24xx Series Configuration Guide

DNS client

Depending on the selection of the DNS Client Source, you will need to select
a source for the DNS, or enter DNS information. Selecting Static requires a
Primary DNS and/or a Secondary DNS address to be entered. Selecting any
other entry from DNS Client Source requires an interface to be selected.
Figure 11: The DNS client screen with DHCP as DNS Client Source
Table 2: DNS client
UI Label
DNS Client Source
Primary DNS
Secondary DNS
DHCP Source
PPPoE Source
Description
•
Static requires a Primary and/or a Secondary DNS
address to be entered.
•
DHCP requires an existing VLAN to be selected
as the DHCP source
•
PPPoE requires an existing PPPoE tunnel to be
selected as the PPPoE source
•
OMCI The DNS Server IP addresses which are
provided via OMCI will be used
The IP address of the Primary Domain Name Server
The IP address of the Secondary Domain Name Server
Only available when DHCP is selected as the DNS
client source. Select from the existing VLANs
Only available when PPPoE is selected as the DNS
client source. Select from the existing PPPoE tunnels