Zhone zNID-GPON-2402 Configuration Manual page 180

Configuration
180
zNID 24xx Series Configuration Guide
a
On the Configuration|VLAN Settings page, click Add New VLAN
b In the VLAN Name text box enter a name for the VLAN
c In the VLAN Tag ID text box enter a VLAN ID
d <Optional> From the Secure Forwarding dropdown select either
Enable or Disable
See Add New VLAN on page 148
e
From the Connection Type dropdown select PPPoE Bridged
f
Click Apply/Save
2
Select ports and set port defaults
a
From the Configuration - VLAN Settings => Edit Selected VLAN
page (which you should be on automatically after completing the
previous step) Select the port members.
Figure 140: Selecting port members and their tagging
Normally the uplink (Fiber WAN (eth0) will be Tagged as in this
example. Select T from the Fiber WAN (eth0) dropdown.
In this example we are only selected one untagged downstream
interface. Select U from the GE2 - GigE (eth2) dropdown.
For Dual Managed connections that map to the VEIP select "O" for
the uplink port member.
b Click Save/Apply
c From the VLAN | Settings page click Edit Port Defaults
d In the PVID text box for GE2 - GigE eth3, enter 403 (the same as the
ID for the VLAN)
for more information