Creating Routed Connections - Zhone zNID-GPON-2402 Configuration Manual

Configuration

Creating routed connections

166
zNID 24xx Series Configuration Guide
VLANs can be configured as Routed. With this connection type, packets are
forwarded based on the destination IP address. Explicit routes can be
configured or the system can use the default route, which is the next hop
gateway for the VLAN. A total of 32 routes can be defined.
When in the Routed mode, additional features are enabled such as filtering
(See MAC filter on page
server on page 209).
To create a routed connection
1 Create VLAN
This first step is the same for all data connections, except for choosing
which connection type. You name the connection and give it a VLAN ID
as well as defining the connection type.
Figure 125: Creating a routed VLAN
a
On the Configuration|VLAN Settings page, click Add New VLAN
b In the VLAN Name text box enter a name for the VLAN
c In the VLAN Tag ID text box enter a VLAN ID
d <Optional> From the Secure Forwarding dropdown select either
Enable or Disable
See Add New VLAN on page 148
e From the Connection Type dropdown select Routed
f
Click Apply/Save
2
Select ports and set port defaults
a
From the Configuration - VLAN Settings => Edit Selected VLAN
page (which you should be on automatically after completing the
previous step) Select the port members.
126), and the DHCP server function (See
for more information
DHCP