Zhone zNID-GPON-2402 Configuration Manual page 128

Configuration
128
zNID 24xx Series Configuration Guide
Table 45: WDS parameters
UI Label
Bridge Restrict
Figure 98: Wireless bridge page with Bridge Restrict set to Enabled
Table 46: Wireless Distribution System options
UI Label Description
AP Mode Defines the WDS modes
•
Access Point
Sets the wireless network for AP and WDS functionality
•
Wireless Bridge
Sets the wireless network for WDS functionality only
Description
Applies to the wireless bridge:
•
Enabled
Access is restricted to devices whose MAC
addresses are entered in the text boxes for Remote
Bridge MAC Address
•
Enabled(Scan)
Scans for any wireless bridge devices in range and
displays them in the Remote Bridge MAC
Address table. Select the wireless bridge device
via the checkbox. Clicking Refresh will update the
wireless bridge devices in range. Wait for a few
seconds for the update.
•
Disabled
Any wireless bridge device will be granted access.