Zhone zNID-GPON-2402 Configuration Manual page 164

Configuration
164
zNID 24xx Series Configuration Guide
2
Select ports and set port defaults
a From the Configuration - VLAN Settings => Edit Selected VLAN
page (which you should be on automatically after completing the
previous step) Select the port members.
Figure 123: Selecting port members and their tagging
Normally the uplink (Fiber WAN (eth0) will be Tagged as in this
example. Select T from the Fiber WAN (eth0) dropdown
In this example we are only selected one untagged downstream
interface. Select U from the GE1 - GigE (eth1) dropdown
b Click Save/Apply
c
From the VLAN | Settings page click Edit Port Defaults
d In the PVID text box for GE1 - GigE eth1, enter 401 (the same as the
ID for the VLAN)
Figure 124: Setting the PVID for the interface