Trace Route - Zhone zNID-GPON-2402 Configuration Manual

Troubleshooting tests

Trace route

222
zNID 24xx Series Configuration Guide
The Trace Route test issues an ICMP echo command to the destination
address. The result shows the path (hops) it took to reach the destination
address.
Figure 174: The Trace Route test
Table 61: Trace route parameter
Parameter
IP Address or Domain
Name
Max Time to Live
Queries Per Hop
Wait Per Response
Description
The final destination can be entered as a dot notation IP
address (i.e. 135.20.3.40) or a Domain Name to be
looked up on the configured Domain Name Server.
Max Time to Live is the maximum number of "hops"
or nodes that the packet is allowed to traverse before
quitting the test. The default is 30.
The number of times the test will go to each hop count.
The Queries Per Hop number must be greater than 1.
The default is 3.
The number of seconds to wait for the echo response.
The default is 3.