Management
26
zNID 24xx Series Configuration Guide
This display is useful for troubleshooting purposes, because you can easily
see how voice is configured using the Web GUI, TR-069, or Telnet/CLI
interface, even when OMCI actually configured it.
Statistics in UNI mode
There are not as many packet-level statistics available for ONU flows since
they are ISO layer 2 "cut-through" flows as illustrated in
flows, page
24. However there are several useful debug tools.
•
There is an IGMP Table for OMCI-configured flows, accessible via
Telnet/CLI or Web GUI
•
Voice Packet Log, Audit Log, and Line Status. Accessible via Telnet/CLI
or Web GUI
•
Ethernet Port Statistics are provided. Accessible via OMCI, Telnet/CLI or
Web GUI
•
GPON physical layer statics are provided. Accessible via OMCI, Telnet/
CLI or Web GUI
There is no Bridge Table to show learned MACs for any OMCI configured
flows.
Reserved GEM ports
When using any configuration mode:
•
GEM ports in the 0xx, 1xx and 2xx range are not supported
The first usable GEM ports for the 24xx ONTs are in the 3xx - 4xx range.
•
GEM ports in the 5xx - 6xx range are reserved for Residential Gateway
traffic flows
The "501 - 628 GEM range" is reserved for Residential Gateway VLANs
configured via the TR-069 or Web GUI interface. The 2426 uses (501 +
ONU ID) as its RG GEM for ONU IDs from 0 to 127.
OMCI configured