Figure 133: Selecting port members and their tagging
Normally the uplink (Fiber WAN (eth0) will be Tagged as in this
example. Select T from the Fiber WAN (eth0) dropdown.
In this example we are only selected one untagged downstream
interface. Select U from the GE2 - GigE (eth2) dropdown.
For Dual Managed connections that map to the VEIP select "O" for
the uplink port member.
b Click Save/Apply
c
From the VLAN | Settings page click Edit Port Defaults
d In the PVID text box for GE2 - GigE eth2, enter 205 (the same as the
ID for the VLAN)
Figure 134: Setting the PVID for the interface
Deployment scenarios
zNID 24xx Series Configuration Guide
173