Zhone zNID-GPON-2402 Configuration Manual page 81

Figure 54: Voice Real-Time Packet Protocol statistics
Real-Time Packet Protocol (RTP) statistics can be used to determine activity
sent into the network or received from the network on the VoIP lines. RTP is
used with Real-time Control Protocol (RTCP) which monitors transmission
statistics through control packets sent into or received from the network.
Table 30: RTP statistics
UI Label
Cumulative
Packets Sent
Bytes Sent
Bytes Received
Packets Lost
Packets Discarded
RTCP Sent
RTCP Received
Description
Cumulative statistics are kept across call
The cumulative count of data bytes in the packets sent
to the network
The cumulative count of data bytes in the packets sent
to the network
The cumulative count of data bytes in the packets
received from the network
The number of packets not received based upon
sequence numbers
The number of packets received but discarded
The number of control packets sent into the network
The number of control packets received from the
network
zNID 24xx Series Configuration Guide
Device info
81