Zhone zNID-GPON-2402 Configuration Manual page 147

Table 53: Creating or editing port defaults
UI Label
PVID
Default 802.1p
IGMP PVID
IGMP 802.1.p
Uplink
Description
The VLAN ID that will be inserted for any non tagged
frames received on this interface.
Note: To strip the tag in the transmit (egress)
direction, this port must be configured as an
untagged member of the VLAN with a
matching VLAN ID.
The default Quality of Service value for the PVID
frames
The Vlan ID used in the VLAN tag that will be added
to all non-tagged IGMP frames received on this
interface.
The default Class of Service value used in the VLAN
tag that will be added to all non-tagged IGMP frames
received on this interface.
Selects which port is defined as an uplink for the zNID.
Normally this would be eth0, the Fiber WAN port.
zNID 24xx Series Configuration Guide
VLAN
147