Wireless Bridge - Zhone zNID-GPON-2402 Configuration Manual

Wireless bridge

The Wireless Bridge page allows you to configure wireless bridge (also
known as Wireless Distribution System (WDS)) functionality. WDS allows
for the expansion of the wireless network across multiple access points
without wired connections. Wireless bridge refers to the connection between
the AP and a wireless repeater device which extends the reach of the AP.
Figure 97: A common scenario for a wireless bridge
A key to setting up the wireless repeater is to use the same SSID and login
credentials.
Table 45: WDS parameters
UI Label
AP Mode
Description
•
Access Point
Both AP and WDS are enabled
•
Wireless Bridge
Only WDS is enabled, otherwise the AP is
disabled
zNID 24xx Series Configuration Guide
Configuration pages
127