Zhone zNID-GPON-2402 Configuration Manual page 48

Management
48
zNID 24xx Series Configuration Guide
Table 7: SNMP agent configurable attributes
UI Label
System Location
System Contact
Trap Manger IP
Trap Filters
Description
Identifies where this device resides. It could a be a
street address or a rack/shelf/slot description. This is a
read only field on this page. System Location can be
set in System info, page 90.
The person responsible for this device This is a read
only field on this page. System Contact can be set in
System info, page 90.
The IP address where traps are sent. Currently there is
only 1 trap manager allowed.
The following are a list of SNMP Traps. When Disable
the traps will not be sent:
•
Cold Start
The ONU was Powered Off and On
•
Warm Start
The software was rebooted
•
Authentication Trap
Three failed attempts in a row try to log into the
box
•
Link Up/Down Trap
A physical interface lost connectivity to its remote
peer
•
Enterprise Trap
All non-standard traps will be filtered when set to
Disabled. Enterprise traps include
Configuration-Change traps, Battery-alarm traps,
CPE-Config-Manager traps.