Readings On The Digital Display; Switching Sidexis To Ready For Exposure State; Operating Instructions Orthophos Xg 5 / Ceph - Sirona Orthophos XG 5 Operating Instructions Manual

Sirona Dental Systems GmbH

Operating Instructions ORTHOPHOS XG 5 / Ceph

. . . . . . . . . . . . . .
Prog.
P1 14.1 64 8
Prog.
H 301 14.1 64 8
Prog.
H 301 14.1 64 8
Prog.
S
T R
60 04 811 D3352
D3352.201.04.25.23 12.2017
5.2

Readings on the digital display

After power-on of the system, running dots initially appear on the digital
display for a brief time.
Then exposure program number P1, the maximum exposure time for this
kV mA
S
program in seconds
exposure program are displayed.
If the exposure program number and a help message H... alternately
appear on the digital display, the help message must be processed first,
kV mA
S
see "Help messages" [ → 89]. The device is ready for operation when no
more help messages are displayed.
kV mA
S
Pressing the R key moves the unit to the starting position.
A patient positioned in the unit may be injured by moving parts.
kV mA
➢ Check that a patient is not positioned in the unit before moving it to
the starting position.
If the Ready LED above the R key starts flashing and error message H
301 appears on the display, briefly press return key R to bring the rotating
element into the starting position. The Ready LED then switches off and
the help message disappears.
The system is now ready to operate.
5.3

Switching SIDEXIS to ready for exposure state

The SIDEXIS software displays the prepared X-ray exposures on the
screen of the PC.
As long as there is no connection to SIDEXIS, error message "H403 –
Switch SIDEXIS to ready for exposure state" and the exposure program
number will alternately appear on the digital display of the Multipad.
➢ Make SIDEXIS ready for exposure. See SIDEXIS Operator's Manual.
SIDEXIS is ready for exposure.
s "kV/mA
and the
CAUTION
5 Operation
" combination stored for this
39