Pin Assignment For Feeding And Looping The Voltage - Siemens SIMATIC ET 200eco PN Operating Instructions Manual

Wiring
3.6 Pin assignment of connectors
3.6.2

Pin assignment for feeding and looping the voltage

Cable connector for supply voltage infeed, X03 connector
The table below lists the pin assignment for the supply voltage infeed.
Table 3- 2
Pin
1
2
3
4
5
Cable connector for loop-through of the supply voltage, X02 socket
The following table lists the supply voltage for loop-through of the supply voltage.
Table 3- 3
Pin
1
2
3
4
5
Note
The M12 sockets for the supply and I/O have the same coding.
Make sure that you wire the supply and the I/O correctly.
40
Pin assignment of the M12 cable connector for the supply voltage infeed
Assignment
Supply voltage 1L+ (non-switched)
Ground 2M (switched)
Ground 1M (non-switched)
Supply voltage 2L+ (switched)
Reserved
Pin assignment of the M12 cable connector for loop-through of the voltage
Assignment
Supply voltage 1L+ (non-switched)
Ground 2M (switched)
Ground 1M (non-switched)
Supply voltage 2L+ (switched)
Reserved
View of the cable connector
(wiring side)
View of the cable connector
(wiring side)
Operating Instructions, 08/2016, A5E01250250-AJ
ET 200eco PN