Table 1- 3
Component
I/O device
①
②
③
④
⑤
⑥
What is an IO-Link Master?
IO-Link is a point-to-point connection to conventional and intelligent sensors/actuators via
unshielded standard cable in proven 3- or 5-conductor technology. IO-Link Masters are
backwards compatible with all DI standard sensors. Switching state and data channel
designed in proven 24 VDC technology.
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
Components of ET 200eco PN (60 mm)
Function
You connect the sensors and actuators
to the I/O device. The I/O device is
available in the following variants:
4 AO U/I 4×M12
•
SF/MT LED
BF LED
ON LED
P1 LK LED
P2 LK LED
Channel status/channel fault
1.2 ET 200eco PN Distributed I/O Device
Figure
⑦
X03: Voltage infeed
⑧
X02: Loop through of the voltage
⑨
Input/output signal
⑩
MAC address
⑪
X01 P2 LAN: PROFINET IO connection
⑫
X01 P1 LAN: PROFINET IO connection
Product overview
15