Siemens SIMATIC ET 200eco PN Operating Instructions Manual page 16

Product overview
1.2 ET 200eco PN Distributed I/O Device
Supports mixed operation of sensors/actuators in the IO-Link, digital input and digital output
operating modes on all four ports of the IO-Link Master.
Table 1- 4
Component
IO-Link master
①
SF/MT LED
②
BF LED
③
ON LED
④
DC 24V LED
⑤
P1 LK LED
⑥
P2 LK LED
⑦ Status display / Communication
⑧
Digital input: Channel status/channel fault
⑨
Digital output: Channel status/channel fault
16
IO-Link Master (6ES7148-6JA00-0AB0)
Function
Connect the following to I/O device:
X1 to X4: IO-Link Devices or sen-
•
sors/actuators
X5, X6: Sensors
•
X7, X8: Actuators
•
Figure
⑩
X03: Voltage infeed
⑪
X02: Loop through of the voltage
⑫
X7/X8: Output signal
⑬
X5/X6: Input signal
⑭
MAC address
⑮
X1 to X4: IO-Link ports/input signal
⑯ X01 P2 LAN: PROFINET IO connection
⑰
X01 P1 LAN: PROFINET IO connection
Operating Instructions, 08/2016, A5E01250250-AJ
ET 200eco PN