Siemens SIMATIC ET 200eco PN Operating Instructions Manual page 211

Technical data
Insulation
Insulation test voltage
•
•
Electrical isolation
•
•
•
•
Status, interrupts, diagnostics
Interrupts
Diagnostics function
•
•
•
•
•
•
•
•
•
Monitoring for
•
•
•
•
•
Sensor supply
Number of sensor supplies
Load current
Short-circuit protection
IO-Link port
Number of ports
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
Ethernet interface
All other circuit elements
Between 1L+ and 2L+
Between 1L+, channels and all other circuit
elements
Between channels
Between Ethernet and all other circuit ele-
ments
Group error/maintenance
Bus monitoring PROFINET IO
Monitoring of supply voltage 1L+
Monitoring of supply voltage 2L+
Existing connection to network
IO-Link port
Digital input/digital output
Fault at digital input/digital output
Diagnostic information can be read
Missing 2L+
Short-circuit of the sensor supply to M
Short-circuit at output (Channel 0 to 3)
Wire break at input
Wire break at output (Channel 0 to 3)
11.1 IO-Link Master (6ES7148-6JA00-0AB0)
1500 V (IEEE802.3)
rms
707 V DC (type test)
Yes
No
No
Yes
Yes
Yes
Red LED / yellow LED "SF/MT"
Red "BF" LED
Green "ON" LED
Green "24 V DC" LED
Green "P1 LK" and "P2 LK" LED; LED for
PROFINET IO infeed and loop-through
Green LED "IO-L"
Green LED
Red LED
Yes
Yes
Yes, for Channels 4 to 7, per channel group
Yes, per channel
Input current < 0.3 mA per channel
Yes, in the off state, per channel
6 (X1-X4 (IO-LINK/DI) and X5-X6 (DI))
200 mA per output to X1-X4 (IO-LINK/DI)
100 mA per output to X5-X6 (DI)
Yes, electronic
4
IO-Link Master
211