Siemens SIMATIC ET 200eco PN Operating Instructions Manual page 161

Technical data
Basic error limit (operational limit at 25 °C, rela-
tive to input range)
Temperature error (relative to input range)
Linearity error (relative to input range)
Repeat accuracy (in steady-state condition at
25°C, relative to input range)
Operational limit for internal temperature sensor
Basic error limit for internal temperature sensor
Status, interrupts, diagnostics
Interrupts
Diagnostics functions
•
•
•
•
•
•
Monitoring for
•
•
•
•
Insulation
Insulation test voltage
•
•
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
3
Group error/maintenance
Bus monitoring PROFINET IO
Monitoring of supply voltage 1L+
Existing connection to bus
Analog input error
Diagnostic information can be read
Sensor supply short-circuit
Wire break
Underflow and overflow
Supply voltage 1L+
Ethernet interface
All other circuit elements
I/O device analog input/analog output
10.1 I/O device analog input
U 0.1%
I 0.1%
R, RTD 0.05%
TC 0.1%
Ambient temperature
positive
U 0.0035%/K
I 0.006%/K
R, RTD 0.0005%/K
TC 0.0035%/K
±0.01%
±0.008%
±3 °C
±2 °C
Yes
Red/yellow "SF/MT" LED
Red "BF" LED
Green "ON" LED
Green "P1 LK" and "P2 LK" LED; LED for
PROFINET IO infeed and loop-through
Red LED
Yes
Yes, only if channel is enabled
4 to 20 mA, 1 to 5 V, resistors and thermoresis-
tors
Yes
Yes
1500 V (IEEE802.3)
rms
707 V DC (type test)
negative
0.007%/K
0.007%/K
0.001%/K
0.007%/K
161