Siemens SIMATIC ET 200eco PN Operating Instructions Manual page 220

IO-Link Master
11.2 IO-Link Master (6ES7148-6JD00-0AB0)
Technical data
Insulation
Insulation test voltage
•
•
Electrical isolation
•
•
•
Status, interrupts, diagnostics
Interrupts
•
Diagnostics function
•
•
•
•
•
•
•
Monitoring for
•
•
Sensor supply
Number of outputs
Load current
Short-circuit protection
IO-Link port
Number of ports
Number of ports that can be controlled simulta-
neously
IO-Link protocol 1.0
IO-Link protocol 1.1
Transmission rate
220
Ethernet interface
All other circuit elements
Electrical isolation / between the load voltag-
es
between load voltage and all other circuit
elements
Between Ethernet and electronic components Yes
Hardware interrupt (device notification)
Group error/maintenance
Bus monitoring PROFINET IO
Monitoring of supply voltage 1L+
Monitoring of supply voltage 2L+
Existing connection to network
IO-Link port
– Port in IO-Link mode
– Port in SIO mode
Diagnostic information can be read
Missing 2L+
Sensor supply short-circuit
1500 V (IEEE802.3)
rms
707 V DC (type test)
Yes
No
Yes
Yes
Yes
Yes; red/yellow LED "SF/MT"
Red "BF" LED
Green "ON" LED
Green "24 V DC" LED
Green "P1 LK" and "P2 LK" LED for PROFINET
IO infeed and loop-through
green/red LED "IO-L"
Green LED "Q"
Yes
Yes
Yes; device supply to ground
4
500 mA per output
Yes, electronic
4
4, in all mounting positions
Yes
Yes
4.8 kBaud (COM1), 38.4 kBaud (COM2), 230.4
kBaud (COM3)
Operating Instructions, 08/2016, A5E01250250-AJ
ET 200eco PN