I/O Device 8 Do Dc 24 V/0.5A 4Xm12 - Siemens SIMATIC ET 200eco PN Operating Instructions Manual

Distributed i/o
Hide thumbs Also See for SIMATIC ET 200eco PN:
Table of Contents

Advertisement

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
Technical data
Load resistance range
Lamp load
Parallel wiring of two outputs
Controlling of a digital input
Switching frequency
Limiting of the inductive shutdown voltage to
lamp load
Short-circuit protection of the output
* Make allowances for the maximum total current when configuring the module.
9.2.2

I/O device 8 DO DC 24 V/0.5A 4xM12

Article number
6ES7142-6BF50-0AB0
Properties
The 8 DO DC 24V/0,5A 4×M12 I/O device has the following properties:
● 8 digital outputs
● Dimensions 30 x 200 mm, dual assignment of the sockets
● Output current: 0.5 A per output
● Rated load voltage DC 24 V
● Suitable for solenoid valves, DC contactors, and indicator lights
● Diagnostics
– "Missing 1L+ or 2L+" for the I/O device
– "Wire break at outputs" per channel
– "Short-circuit to M at outputs" per channel
● Parameterizable response to CPU/Master STOP
● Prioritized startup
● Media redundancy
126
For "0" signal (residual current)
To increase performance
For redundant control of a load
With resistive load
With inductive load
With lamp load
Response threshold
Max. 1.5 mA
22 Ω to 3.3 kΩ
Max. 5 W
No
Supported
Yes
Max. 100 Hz
Max. 0.5 Hz
Max. 1 Hz
Typ. 1L+/2L+ (-47 V)
Yes, electronic
Typ. 1.8 A (per channel)
Operating Instructions, 08/2016, A5E01250250-AJ
ET 200eco PN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents