Technical data
Digital outputs
Number of outputs
Insulation
Insulation test voltage
•
•
Electrical isolation
•
•
•
•
Status, interrupts, diagnostics
Interrupts
Diagnostics function
•
•
•
•
•
•
•
•
Monitoring for
•
•
•
Actuator selection data
Cable length, shielded
Cable length, unshielded
Output voltage
•
•
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
Ethernet interface
All other circuit elements
Between 1L+ and 2L+
Between 1L+, channels and all other circuit
elements
Between channels
Between Ethernet and all other circuit ele-
ments
Group error/maintenance
Bus monitoring PROFINET IO
Monitoring of supply voltage 1L+
Monitoring of supply voltage 2L+
Existing connection to network
Digital output
Fault at digital output
Diagnostic information can be read
Failure of 1L+ and 2L+
Short-circuit
Wire break
Nominal value
For signal "1"
I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
8
1500 V
(IEEE802.3)
rms
707 V DC (type test)
Yes
No
No
Yes
Yes
Yes
Red/yellow "SF/MT" LED
Red "BF" LED
Green "ON" LED
Green "DC24V" LED
Green "P1 LK" and "P2 LK" LED; LED for
PROFINET IO infeed and loop-through
Green LED
Red LED
Yes
Yes
Yes, per channel
Yes, in the off state, per channel
Max. 30 m
Max. 30 m
DC 24 V
Min. 1L+/2L+ (-0.8 V)
139