Pin Assignment Of The Fc Outlet (4-Pin Connector) - Siemens SIMATIC ET 200SP HA Equipment Manual

Pin assignments
A.3 Pin assignment of the FC outlet (4-pin connector)
Note
Shield support and lightning protection design
If you connect a BA 2xRJ45VD HA BusAdapter to existing PROFIBUS cabling, the same
specifications regarding shielding and lightning protection concept apply as for PROFIBUS.
A.3

Pin assignment of the FC outlet (4-pin connector)

Table A-3 Pin assignment of the FC outlets
View of FC outlet
Note
Using PROFIBUS standard cable GP with FC connector
If you use the PROFIBUS standard cable GP, the wires must be stripped before inserting them
into the FC connector.
32
Contact Color
①
1 White
2 Yellow
3 Blue
4 Orange
②
Assignment (from left to right)
TX+ (Transmit Data +)
RX+ (Receive Data +)
TX- (Transmit Data -)
RX+ (Receive Data -)
GND (functional earth - FE)
BusAdapter for Distributed I/O
Equipment Manual, 09/2019, A5E39261458-AB