Machine Information Menu; Status Menu - Sony PCS-TL50 Operating Instructions Manual

Machine Information Menu

The Machine Information menu shows the
versions of the Video Communication
System and the connected equipment for
exclusive use, installed software versions,
etc.
Machine Information
Host Version
ISDN UNIT Version
DSB Version
DSP Version
LCD Controller Version
Software Option
Option I/F
Host Name
IP Address
MAC Address
Serial Number
Host Version
Displays the software version of the Video
Communication System.
ISDN UNIT Version
Displays the version of the connected ISDN
Unit.
DSB Version
Displays the version of the connected
PCSA-DSB1S Data Solution Box.
DSP Version
Displays the version of the built-in DSP
(Digital Signal Processor) for audio/video
codec.
LCD Controller Version
Displays the version of the LCD display of
the Video Communication system.
Software Option
Displays the optional software installed.
None: No software is installed.
Multipoint (H.323): The PCS-323M1
H.323 MCU software (for LAN) is
installed.
Multipoint (H.320): The PCS-320M1
H.320 MCU software (for ISDN) is
installed.
Multipoint (H.320 + H.323): Both the PCS-
323M1 and PCS-320M1 MCU software
are installed.
SIP: The PCSA-SP1 SIP software is
installed.
60
Registering Local Information
VerX.XX
VerX.XX
VerX.XX
VerX.XX
VerX.XX
Multipoint(H.323)
DSB, ISDN UNIT
PCS-TL50
XX.XX.XX.XX
08-00-46-DF-5B-57
End
12345
Multipoint (H.323), SIP: The PCS-323M1
MCU software and PCSA-SP1 SIP
software are installed.
Multipoint (H.320), SIP: The PCS-320M1
MCU software and PCSA-SP1 SIP
software are installed.
Multipoint (H.320 + H.323), SIP: The
PCS-323M1 and PCS-320M1 MCU
software and PCSA-SP1 SIP software
are installed.
Option I/F
Displays the optional connected equipment.
None: No optional equipment is connected.
ISDN UNIT: The PCSA-B384S or PCSA-
B768S ISDN Unit is connected.
DSB: The PCSA-DSB1S Data Solution Box
is connected.
Host Name
Displays the host name.
IP Address
Displays the IP address.
MAC Address
Displays the MAC address.
Serial Number
Displays the serial number.

Status Menu

The Status menu shows the current status of
communication.
The ISDN Line Status, LAN Line Status or
LAN Connection Status will also be
displayed depending on the line interface
used.
Communication Status
One page for each point connected to the
system will be displayed. The connected
point is shown at the upper right corner of
the page as "Connection A (or B, C....)".
The terminal's name of the point is also
displayed at its side.
The items below are shown both in the
columns for "Encode" and "Decode". The
descriptions under "Encode" show the