Display Vxlan Neighbor-Discovery Client Summary - HP 6127XLG Series Command Reference Manual

display vxlan neighbor-discovery client summary

Use display vxlan neighbor-discovery client summary to display ENDC settings and connectivity to
ENDSs.
Syntax
display vxlan neighbor-discovery client summary
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display ENDC settings and connectivity to ENDSs.
<Sysname> display vxlan neighbor-discovery client summary
Interface
Tunnel1
Tunnel3
Table 10 Command output
Field
Interface
Local Address
Server Address
Network ID
Reg
Auth
Status
Related commands
vxlan neighbor-discovery authentication
•
• vxlan neighbor-discovery client enable
vxlan neighbor-discovery client register-interval
•
Status: I-Init
Local Address Server Address Network ID Reg Auth
1.1.1.1 1.1.1.1
1.1.1.1 1.1.1.1
Description
Name of the ENDC-enabled NVE tunnel interface.
Source IP address of the NVE tunnel. This field displays NA if no source IP address has been
assigned to the NVE tunnel.
IPv4 address of the ENDS.
NVE tunnel network ID. This field displays NA if no network ID has been configured.
Registration update interval. The ENDC updates its registration with the ENDS at this
interval.
ENDP authentication status:
•
enabled.
•
disabled.
Status of the connection between the ENDC and the ENDS:
•
I—Connection is initializing.
•
E—Connection has been set up.
•
P—The ENDC is probing for the ENDS for setting up a connection.
E-Establish P-Probe
1 15
3 15
33
Status VPN Instance
disabled E [No Vrf]
disabled E [No Vrf]