Troubleshooting - Vatech PaX-i3D Smart User Manual

9. Troubleshooting

If a problem occurs while operating this equipment, perform the corresponding
troubleshooting measure outlined in the table below. If the problem persists, please
contact our customer support staffs.
If the device is not moving
Cause
Power failure
Initialization status
Control PC connection
failure
If the exposure switch is not functioning
Cause
Ready status
If imaging cannot be performed
Cause
Initialization status
Check the equipment's power supply.
Wait until the equipment has initialized and then try
again.
Check the connection status of Communication
Port(Optic) which connects the PC to the equipment.
Check whether it is ready for capturing at the console
software.
Wait until the equipment has initialized and then try
again. If this problem persists, restart the equipment.
110 I
PaX-i3D Smart
Solution
Solution
Solution