Manufacturer's Liability; Owner And Operator's Obligations; General Information - Vatech PaX-i3D Smart User Manual

1. General Information

1.1 Manufacturer's Liability

The manufacturers and/or retailers of this equipment assume responsibility for the safe
and normal operation of this product only when:
● The equipment has been installed by a VATECH authorized technician.
● The equipment has been installed in accordance with all of the cautions and
conditions for installation.
● Genuine VATECH approved equipment and components have been used at all
times.
● All maintenance and repairs have been performed by a VATECH authorized agent.
● The equipment has been used normally in accordance with the user's manual.
● The equipment damage or malfunction is not the result of an error on the part of the
owner or operator.

1.2 Owner and Operator's Obligations

● The owner of this equipment shall perform constancy tests at regular intervals in
order to ensure patient and operator safety. These tests must be performed in
accordance with local X-ray safety regulations.
● The owner of this equipment shall perform regular inspection and maintenance of
the mechanical and electrical components in this equipment to ensure safe and
consistent operation (IEC 60601-1). The owner of this equipment shall ensure
inspection and cleaning works are performed in accordance with the maintenance
schedule outlined in Chapter 8 Cleaning and Maintenance.
2 I
PaX-i3D Smart