Guidance And Manufacturer’s Declaration - Vatech PaX-i3D Smart User Manual

13. Appendices
Guidance and manufacturer's declaration - electromagnetic immunity
The model PaX-i3D Smart(PHT-30LFO) is intended for use in the electromagnetic environment
specified below. The customer or the user of the model PaX-i3D Smart(PHT-30LFO) should
assure that it is used in such an environment.
Emissions test
Electrostatic
±6 kV Contact ±8
discharge (ESD)
kV air
IEC 61000-4-2
±2 kV for power
Electrical fast
supply lines ±1 kV
transient/burst
for input/output
IEC 61000-4-4
lines
±1 kV line(s) to
Surge
line(s) ±2 kV line(s)
IEC 61000-4-5
to earth
< 5 % U
% dip in U
Voltage
0.5cycle 40 % U
dips, short
(60 % dip in U
interruptions and
for 5 cycle, 6 cycle
voltage variations
70 % U
on power supply
in U
input lines
30 cycle <5 % U
IEC 61000-4-11
(< 95 % dip in U
for 5 s
Power frequency 3 A/m
(50/60 Hz)
magnetic field
IEC 61000-4-8
is the a.c. mains voltage prior to application of the test level.
NOTE) U
T
Compliance Compliance level
±6 kV Contact ±8
kV air
±2 kV for power
supply lines ±1 kV
for input/output
lines
±1 kV line(s) to
line(s) ±2 kV line(s)
to earth
(> 95 < 5 % U
T
) for % dip in U
T
0.5cycle 40 % U
T
) (60 % dip in U
T
for 5 cycle, 6 cycle
(30 % dip 70 % U
T
) for 25 cycle, in U
T
30 cycle <5 % U
T
) (< 95 % dip in U
T
for 5 s
3 A/m
140 I
PaX-i3D Smart
Electromagnetic environment
Floors should be wood,
concrete or ceramic tile. If floors
are covered with synthetic
material, the relative humidity
should be at least 30 %.
Mains power quality should be
that of a typical commercial or
hospital environment.
Mains power quality should be
that of a typical commercial or
hospital environment.
Mains power quality should be
(> 95 that of a typical commercial
T
) for or hospital environment. If the
T
user of the model PaX-i3D
T
) Smart(PHT-30LFO) image
T
intensifier requires continued
(30 % dip operation during power mains
T
) for 25 cycle, interruptions, it is recommended
T
that the model PaX-i3D
T
) Smart(PHT-30LFO) be powered
T
from an uninterruptible power
supply.
Power frequency magnetic fields
should be at levels characteristic
of a typical location in a
typical commercial or hospital
environment.
-guidance