Getting Started; Turning On Equipment - Vatech PaX-i3D Smart User Manual

5. Getting Started

5.1 Turning On Equipment

The imaging system mainly consists of the imaging equipment and the PC.
Before turning on the equipment, please confirm the equipment and PC correctly
installed.
● Do not place the patient close to the equipment is on. Doing so may cause
injury to the body and damage to equipment.
● Do not turn on the PC while the equipment is in operation. Doing so may
cause an error.
● Excessive temperature changes may cause condensation to form on the
equipment. When room temperature is reached, turn on the equipment.
● Equipment rebooting: After turning it off, the equipment may be turned on
again after 20 seconds.
● Warm-up the equipment for at least 5 minutes before the operation. For the
best image quality, it is recommended that equipment be warmed-up for 30
minutes or more.
If the equipment has not been used for a long time, please leave enough time
to warm-up the equipment. It extends the life of the x-ray tube.
42 I
PaX-i3D Smart