Marks And Symbols - Vatech PaX-i3D Smart User Manual

1. General Information

1.4 Marks and Symbols

Symbols
CLASS 1 LASER PRODUCT
Description
Alternate current
Attention: consult accompanying documents
Dangerous voltage
Protective earth (Ground)
Off (power: disconnect from the main switch)
On (power: connect to the main switc
IEC60601-1
Degree of Protection from Electric Shock
TYPE B Equipment
Radiation hazard
EC representative
The CE symbol indicates that this product complies with
the European Directive for Medical Devices 93/42/EEC
as amended by 2007/47/EC as a class IIb device.
UL mark: UL 60601-1 / CAN/CSA
C22.2 No.601.1 3ZY1
Address where the equipment was manufactured
This symbol indicates that electrical and electronic
equipment must not be disposed of as unsorted
municipal waste and must be collected separately
This symbol warns ESD hazard.
This symbol indicates that this equipment is classified as
a CLASS 1 LASER PRODUCT in accordance with IEC
60825-1 ED.1 regulations.
Date of manufacture
Refer to Instruction manual
4 I
PaX-i3D Smart
Location
-
Label
Power board
Power board
Main switch
Main switch
Label
Label
Label
Label
Label
Label
Label
MCU board/Board
package
Label
Label
Label