Lightware UMX-OPT-TX150R User Manual page 57


  
7. Firmware Upgrade
Step 5. Upgrade the device.
A warning window will pop up before starting upgrading the device:
▪ Do not unplug the power cable and the LAN cable while the upgrade is in progress. Click OK to continue.
When you confirmed the warnings, the upgrade process starts automatically.
UMX-OPT-TX150R – User's Manual
Details button opens a new window where the process is logged – see below.
Step 6. Finish.
If the upgrade of a device is finished, the log can be opened by the View button on the right When all the tasks
are finished, a window appears. Click OK to close and Next to display the summary page.
Repeat button starts the process again with the selected device(s).
Open logs button opens the temporary folder where the logs can be found.
Export logs by saving the files as a zipped file.
Press Exit to close the program.
If the upgrade failed, the progress bar of the device is changed to red; restart the device(s) and repeat the
process.
ATTENTION! However the device is rebooted after the firmware upgrade, switching it off and on again is
recommended.
57