Performing Tests - IDEAL Networks LanXPLORER Pro Manual

6.15.2 Performing tests

The name of the IP address and of the network is shown on the standby screen with which
the device has been connected.
1. Select the menu point "Tests" on the
standby screen.
2. Select the desired individual test. All of the
tests are the same as those available
through the RJ-45 or Optical ports, with
the addition of the Scan function used to
search for available Wi-Fi networks.
3. Perform the test.
The result is stored in the short-term memory and
displayed in the test summary.
LanXPLORER Pro
User Manual
Figure 72: Wi-Fi Test results
150835 Iss 5
Page 51