IDEAL Networks LanXPLORER Pro Manual page 24

Netmap
This menu allows settings to be made for the netmap test.
1. Select the menu point "Netmap".
2. Select the area to be scanned by activating or
deactivating the option Local Network or
Custom Network. The option activated is
indicated by a radio button.
3. Select the desired option.
4. Select the desired test parameters or enter
the desired information with the alphanumeric
keys.
5. Save the entry made with Apply. You can exit
the menu without saving the changes with
Escape.
Option
Local Network
Custom
Network
IP Address
Scan range
IPv6 Scan
Custom Service
VoIP (Voice over IP)
This menu allows settings to be made for the quality parameter of the VoIP test. The
LanXPLORER compares each call with the set quality parameters and evaluates the call.
1. Select the menu point "VoIP".
Option Description
VOIP Port 1 Setting the communication port 1
VOIP Port 2 Setting the communication port 2
Jitter (ms) Limit value for the measuring parameter Jitter
Delay (ms) Limit value for the measuring parameter Delay
Limit value for the measuring parameter of lost
Lost Pkts (%)
packets
2. Select the desired option.
3. Enter the desired information with the alphanumeric keys.
4. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
LanXPLORER Pro
User Manual
Description
Scan local network - automatic setting is used.
Scan specific network area
Defines the Custom Network area to be scanned
Scan Range Max Number of Hosts
Normal (/24) 256
Wide (/20) 4096
Include IPv6 hosts in the scan
Scan for hosts running specific UDP / TCP services, eg SIP, on
specific ports
Figure 33: Netmap
Test time
Short
Medium
Figure 34: VoIP
150835 Iss 5
Page 23