IDEAL Networks LanXPLORER Pro Manual page 32

• Copy the directory to a USB key and insert it into the USB port.
• From the home screen press the soft key SETUP (F3).
• Select the icon 802.1x. The 802.1x setup screen is displayed.
• Press soft key CERTS (F1) to load the certificates. The loaded certificates will remain
until further certificates are loaded or a factory reset is performed.
When entering the 802.1x setup details, scroll to each field, press Enter and select from the
drop down menu or look up table as required. Press enter again to return to the 802.1x setup
screen. RESET clears all certificate data from the setup screen.
Username and Password fields will display the QWERTY keyboard. When you have entered
the Username/Password, press OK to return to the 802.1x setup screen.
The tester's time and date must be correct before 802.1x will work.
• Set the '802.1x' field to Enable.
•
Select the required EAP Method from the drop down menu in the 'EAP Method' field.
See Notes 1 to 4 below.
• Scroll to the 'Certificate' field and select the required certificate from the look up table.
• Enter a username and password (when required).
• Scroll to the 'Root Cert' field and select the required certificate from the look up table
(when required).
•
Press the soft key APPLY (F2). You can now connect through the 802.1x port.
Notes
1. Completing the fields 'Client Certificate' and 'Certificate Password' is
required only when the EAP Method is: EAP-TLS, Any or, the Tunneled
Method is TLS.
2. The Tunneled Method and Root Certificate options are enabled only when
the EAP Method is
EAP-TLS, EAP-PEAP, EAP-TTLS or Any.
3. Use the Root Certificate option only when you want to authenticate the
server (RADIUS server).
4. When the EAP Method is EAP-TLS and the Tunneled Method is TLS, the
fields Username and Password are optional. For all other types of EAP
Method a Username and Password must be entered.
LanXPLORER Pro
User Manual
150835 Iss 5
Page 31