Chapter 6. Test Description And Procedure; Test Summary; Performing Individual Tests; Resetting Test Results - IDEAL Networks LanXPLORER Pro Manual

Chapter 6.
The availability of individual tests depends on test setup of the LanXPLORER. An overview
the the tests available is given in Chapter 4.
6.1
This menu shows all tests possible with the current tests. In addition it shows which tests
have already been performed and the associated pass/fail results.
1. Connect the LanXPLORER in the desired manner.
2. Select the menu point "Tests" on the standby screen.
3. Select More to display the next page.
Figure 54: Test summary
Symbol Overall test results
6.1.1

Performing individual tests

1. Select the desired individual test.
2. Perform the test.
The result is stored in the short-term memory and displayed in the test summary.
6.1.2

Resetting test results

1. Select reset in order to reset marked individual tests that are shown in the test
summary.
All test results of the marked individual tests are deleted from the short-term memory.
6.1.3

Saving test results

1. Select Save to store all test results in the current job.
All test results are stored in the current job and can be managed there.
LanXPLORER Pro
User Manual
Test description and procedure

Test summary

Test not performed.
Test performed and evaluated as passed.
Test performed and evaluated as failed.
Figure 55: Test summary
(page 2)
150835 Iss 5
Page 38