Autotest; Ip Tests - IDEAL Networks LanXPLORER Pro Manual

3.5.2

Autotest

The Autotest options can be set in this menu. You can set the tests to be performed by
actuating the Autotest button or selecting the "Autotest" menu.
1. Select the menu point "Autotest".
2. Activate or deactivate the option by selecting.
An activated option is indicated by a check
mark in the box.
3. Save the entry made with Apply. You can exit
the menu without saving the changes with
Escape.
3.5.3

IP Tests

This menu allows settings to be made for the IP test.
1. Select the menu point "IP Tests".
2. Select More to display the next page.
Figure 28: IP Tests
Ping4 (Ping IPv4)
This menu allows settings to be made for the ping IPv4 test.
1. Select the menu point "Ping4".
2. Select the tick-box next to the targets to be included in the ping test.
3. Press F1 (MORE) to display the next page.
Figure 29: Ping4
LanXPLORER Pro
User Manual
Figure 26: Autotest settings
Figure 27: IP Tests (page 2)
Figure 30: Ping4 (page 2)
150835 Iss 5
Page 21