System; Owner; Preferences; Display Settings - IDEAL Networks LanXPLORER Pro Manual

3.2

System

Instrument management is possible in the "System"
menu.
1. Select the menu point "System".
2. Make the settings by selecting the applicable
menu point.
3.2.1

Owner

This menu allows information to be saved on the
technician performing the work, the company and the
client.
1. Select the menu point "Owner".
2. Select the desired option.
3. Enter the desired information with the
alphanumeric keys.
4. Save the entry made with OK. You can exit
the menu without saving the changes with
Cancel or Escape.
5. Save the entry made with Apply. You can exit
the menu without saving the changes with Escape.
3.2.2

Preferences

This menu allows settings to be made for the display
and display format.

Display settings

1. Select the menu point "Pref".
2. Select the desired option.
3. Set the desired option.
4. Save the entry made with Apply. You can exit
the menu without saving the changes with
Escape.
Image Description
Defines the time after which the LanXPLORER will shut off automatically, if not in
Auto Off
use.
Backlight Defines the time after which the back light dims automatically.
Keyclick Activates/deactivates an acoustic signal when selecting menus and options.
Definition of units of measure for length measurement in ft or m (feet or meters).
Length Units
The default setting depends on the language set.
Screen
Calibration of touchscreen.
Calibration*
LanXPLORER Pro
User Manual
Figure 11: System
Figure 12: User Information
Figure 13: Display
150835 Iss 5
Page 14