Evaluation Of Analysis Test Results; Graphs For Analysis Tests - IDEAL Networks LanTEK III Manual

5. Confirm selection of test with Enter. After completion of test, a result table
opens.
6.4

Evaluation of Analysis Test Results

The overall result of the analysis test is displayed in the upper right on the screen below the
title bar. The results for the individual wire pairs are displayed on the right side of the
respective test.
The above example shows the screen for DC resistance.
• The overall result of the test appears in the upper right, beside the date.
• The results of the individual wire pairs appear in the last column on the right (result
column).
The results for the overall test and the single tests are indicated similar to Autotest.
6.4.1

Graphs for Analysis Tests

After completion of test series, certain analysis results can be displayed in table or graph
format. The graph display in analysis mode is comparable to the one of Autotest.
LanTEK III
User Manual
Fig. 70 Single Tests
Fig. 71 Evaluation of Analysis Test Results
Overall result
Individual Results
161809 Iss 2
Page59