6.5
This test searches a network for hosts. The LanXPLORER uses the test results to complete an
overview of all servers and printers present in the connected network. It also output the total
number of all devices found. A maximum of 511 hosts can be detected and displayed.
6.5.1
Performing test
1.
Select the menu point "Tests" on the
standby screen.
2. Select the menu point "Netmap".
3. Select Run to start the test.
6.5.2
Saving Netmap for comparisons - Verify
The device list can be saved in the instrument and used for comparison with new tests.
1.
Select Save Map to store the current Netmap.
2. Select the currently saved Netmap.
3. Select Rename to edit information.
4. Enter the desired information with the alphanumeric keys.
5. Save the entry made with OK. You can exit the menu without saving the changes
with Cancel or Escape.
6.5.3
Display results
It is possible to view the test details on the individual hosts.
•
IP address
•
MAC address
•
Services
•
Station name
1.
Select the desired option to display a host overview.
2. Mark and ENTER the host for which you want to view more details.
3. Select the Details.
LanXPLORER Pro
User Manual
Netmap
Figure 60: Netmap
150835 Iss 5
Page 42