IDEAL Networks LanXPLORER Pro Manual page 62





• Trace Route Results



• Loop Back Setup

• Top Ten Setup

• Top Ten Results



• Blink Test Sequence: Off/10/Off/100/Off/1000 Mb/s
• IP Conflicts
Statistics
• Top Ten Setup



• Top Ten Results



• IP Results

• VLAN Results

• MAC Results

• MAC Discovery LLDP,CDP, EDP
• Link Results



Storage
• Internal storage configurations


• Internal storage results
LanXPLORER Pro
User Manual
Target: IP address, URL.
Max Hops: 1 to 100.
Timeout: 1 to 30 sec.
Type: ICMP, UDP
Info: READY, IN PROGRESS, PASSED, NO RESPONSE, UNKNOWN
HOST.
Hop: IP address, name.
Delay(ms): t1, t2, t3
Type: Wireline, MAC, IP, UDP
Period: 1 sec, 30 sec, Peak
Top Ten: Talkers, Errors, Protocols.
Host: IP address.
Bandwidth: Average Mb/s
Period: 1 sec, 30 sec, Peak
Talkers & Listeners
IP or MAC
Top Ten: Talkers or Listeners, IP or MAC (average Mb/s), Errors (Frame
Count), Protocols type (Frame Count).
Host: IP address.
Bandwidth: Average Mb/s
Info, Listening, IPv4/6 address, Gateway, Subnet mask, Primary DNS,
Secondary DNS, DHCP Server
Rx & Tx: VLAN (Endpoint), Rx & Tx: VLAN (In-Line)
Rx & Tx: Frames, Total Bytes, Unicast, Broadcast, Multicast, Max
Frames/sec, Current Rate bps, Average Rate bps, Max Rate bps,
Current Utilisation %, Average Utilisation %, Max Utilisation %, Frame
Size
PORT: PoE Type, PoE Pair, Speed, Duplex, MDI / MDIX, Signal Level,
Polarity.
PARTNER: 10M-HD. 10M-FD, 100M-HD, 100M-FD,
1000M-HD, 1000M-FD.
ERRORS: Collisions, FCS Errors, Undersize, Oversize, Jabbers, Bad
Length
Number of configurations – 2 (Current + Factory settings).
Export to USB. Format: .xml
150835 Iss 5
Page 61