Chapter 11.
Connectors
•
Primary RJ45 test port on left side
•
Secondary RJ45 test port on right side
•
Optical test port on left side
•
USB port for management at top
•
Power port for battery charging, mains powering via adaptor on right side
Controls
•
Screen: Touch Screen
•
On/Off: Push Button
•
Function Keys: F1 to F4
•
Navigation Keys: Cursor, Enter & Escape
•
Autotest
•
Reset: Push Button
Displays
•
Charger LED: Indication of charging status
•
Primary RJ45 Link LED: ON indicates Primary link UP
•
Primary RJ45 Activity LED: Flashing indicates Primary link activity
•
Secondary RJ45 Link LED:ON indicates Secondary link UP
LanXPLORER Pro
User Manual
Specifications
Used for: Cable Test, Endpoint Test, In-Line Test
User-replaceable contacts
500 insertion cycles
Used for: In-Line Test
User-replaceable contacts
500 insertion cycles
Used for: Endpoint test
SFP Socket
Used for: Result upload, Software update, Wi-Fi antenna
Class: Host
Connector Type A
1.1 USB Type
12V Voltage
Connector Type 2.0 pin power jack
2 Amp Current
Centre Pin positive polarity
Used for: Touch Control of all Tester Functions
Located on front
Used for: Power On/Off
Located on front
Used for: Screen Defined Functions
Located on front
Used for: User Interface Navigation
Located on front
Used for: Launch of automatic test sequence
Located on front
Used to Escape from exceptional lockup condition
Accessible through hole inside battery compartment using stylus tip
Red/Green
Located on front
Green
Adjacent to socket
Green
Adjacent to socket
150835 Iss 5
Page 57