6.9
This test allows display of all hops up to arrival at the target address.
6.9.1
Performing test
1.
Select the menu point "T-route".
2. Select Setup to define the test parameters.
3. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
4. Select Run to start the test.
6.9.2 Display results
All of the hops passed on the route to the destination are listed, together with the time taken
for each hop.
Image
Description
Target
IP target address
Passed –
Info
Failed –
Hop
IP address of hop skipped.
Time required to reach next hop in
Tx ms
milliseconds.
Select an individual hop and press Enter to display the
detailed results for the hop.
LanXPLORER Pro
User Manual
Trace Route
Test passed.
Test failed.
Figure 66: Trace Route - Test
result
Figure 67: Trace Route - Hop
details
150835 Iss 5
Page 46