Power Options; Mains Operation - IDEAL Networks LanXPLORER Pro Manual

The example shows optional selection of the Setup
softkey with the softkeys at the bottom of the screen.
Selection can be accomplished with Function key F4.
2.2

Power options

The LanXPLORER can be operated with replaceable AA alkaline batteries (optional battery
holder required) as well as rechargeable AA batteries or with an NiMH rechargeable battery
pack (default).
• The LanXPLORER can operate for approx. 4 hours with the rechargeable batteries. The
actual operating time in battery mode depends on various factors such as use of the
background lighting and ambient temperature.
• If the rechargeable battery charge level drops to below the required voltage, a warning
message appears. The instrument switches off automatically before any negative
effects occur for the test results.
• To preserve your rechargeable batteries, it is possible to set the LanXPLORER to
switch off automatically after a certain time with no activity.
• To increase the service life of your rechargeable batteries we recommend removing
the batteries when the instrument is not used for longer periods of time.
2.2.1

Mains Operation

The LanXPLORER can be operated using an external DC power source (AC/DC power pack).
During operation of the instrument with the AC/DC charger/power pack, note that:
•
The battery pack in the instrument is trickle charged;
• A mains plug is shown in the upper right-hand area on the LanXPLORER;
• Rechargeable AA batteries are not charged in the instrument.
CAUTION!
Use only the power pack supplied with the instrument. Other power packs can damage the tester.
NOTE:
When testing shielded cables do not connect mains power, because otherwise a short-circuit to earth
could occur leading to output of warnings for protection of the tester input.
LanXPLORER Pro
User Manual
Figure 4: Softkeys and
function keys
150835 Iss 5
Page 11