Chapter 9. Lanxplorer Firmware Update - IDEAL Networks LanXPLORER Pro Manual

Chapter 9.
The LanXPLORER firmware should be updated at regular intervals. The latest firmware
update can be downloaded from the
If you register for the Newsletter on the
notified of new downloads automatically.
The LanXPLORER firmware can be updated using as USB storage device.
NOTE:
Before updating the firmware, make a backup of the test data on the LanXPLORER.
When updating the firmware, power should be supplied to the LanXPLORER using the
charger/power pack or ensure that the rechargeable batteries are fully charged.
Data export and data import is accomplished exclusively to/from a USB storage device connected
to the LanXPLORER.
4. Store the firmware update on an empty USB storage device.
8. Plug the USB storage device into the USB interface on the LanXPLORER.
9. Switch on the LanXPLORER.
10. Ensure that the rechargeable batteries in the LanXPLORER are charged or
connect the LanXPLORER to mains power.
11. Select the menu point Setup.
12. Select the menu point "System".
13. Select the menu point "Update".
14. Update the software. You can exit the menu
without saving the changes with Cancel or
Escape.
15. Select "Confirm" to start the update.
16. Wait until the update has concluded and the
main menu appears on the LanXPLORER
display after restarting.
17. Remove the USB storage device.
NOTE:
Depending on the update, the LanXPLORER will re-start automatically or requires a manual re-start.
LanXPLORER Pro
User Manual
LanXPLORER Firmware Update
IDEAL INDUSTRIES Ltd
IDEAL INDUSTRIES Ltd
Internet site.
Internet site, you will be
Figure 73: Update
150835 Iss 5
Page 55