Rj45 - IDEAL Networks LanXPLORER Pro Manual

3.3
This menu allows configuration of how the RJ45 interface connects to the network.
1. Select Setup.
2. Select the menu point "RJ45".
3. Select More to display the next page.
Figure 19: RJ45 Settings
Option Description
Enabled:
Auto
Disabled:
Negotiation
manually.
Speed Setting the network speed.
Full Duplex (all pairs are used for transmitting and receiving).
Mode
Half Duplex (pairs are used for transmitting or receiving).
Min. Rx Size Smallest recognized packet size
MDI Configuration of the device interface
MACError!
Bookmark not Display of MAC address.
defined.
Set the time that the tester will wait for Ethernet link establishment before
Link Wait Time
it stops searching
Monitor Mode Set the time that the tester will wait for both sides of the Ethernet to be
Timeout (s) established before reverting to endpoint mode
Save the entry made with Apply. You can exit the menu without saving the changes with
Escape
LanXPLORER Pro
User Manual

RJ45

Automatic recognition of the network speed.
It is necessary to set the communication rate and mode
Figure 20: RJ45 Settings
(page 2)
150835 Iss 5
Page 18