Wi-Fi - IDEAL Networks LanXPLORER Pro Manual

5.6
With this test the LanXPLORER can be connected with all access points and test wireless
networks within reception range. To increase the reception range, plug the supplied high
sensitivity antenna into the USB port before following the procedure below. An overview the
tests available is given in Chapter 4.
1. Select the menu "Ports" "Wi-Fi".
2. Select Scan to start recognition of the network.
Image Description
SSID SSID of access point.
CH Channel
Security protocol
3. Select Run to start recognition of the network again.
4. Select Details to view further information on individual networks.
LanXPLORER Pro
User Manual

Wi-Fi

Figure 53: Wi-Fi Scan
150835 Iss 5
Page 37