Verify; Performing Test; 6.6.2 Saving Netmap For Comparisons - Verify; 6.6.3 Display Results - IDEAL Networks LanXPLORER Pro Manual

6.6
This test allows a Netmap already saved to be compared with the current Netmap.
6.6.1

Performing test

5. Select Setup to select the Netmap already saved for comparison.
6. Select the file to be compared and confirm your selection with Apply.
NOTE:
The name of the file selected for comparison then appears in the menu window at the top right.
7. Select Run to start the comparison test.
The LanXPLORER then displays a comparison list for the
current Netmap and the saved Netmap.
Image Description
The same host was recognized in the
same
comparison file and the current Netmap.
The host is new in the current Netmap or the
diff
host is not present in the current Netmap

6.6.2 Saving Netmap for comparisons - Verify

The current device list can be saved in the instrument and used for comparison with new
tests (see 6.5.2).

6.6.3 Display results

SHOW COMPARISON LIST
It is possible to view the test details on the comparison test.
Changed Hosts
New Hosts
Missing Hosts
Select the desired option to display a host overview.
VIEW TEST DETAILS
It is possible to view the test details on the individual hosts.
• IP address;
• MAC address;
• Services;
•
Station name.
1. Select the desired option to display
a host overview.
2. Mark and ENTER the host for which
you want to view more details.
3. Select the Details.
LanXPLORER Pro
User Manual

Verify

Figure 61: Verify - Comparison
Figure 62: Verify - Host List
overview
150835 Iss 5
Page 43