IDEAL Networks LanXPLORER Pro Manual page 25

T-Route 4 (Trace Route IPv4)
This menu allows settings to be made for the IPv4 trace route test.
1. Select the menu point "T-Route4".
Option Description
Select the target address to which the ping is to
Target be sent. Use the option ... to select the list with
the target addresses you have saved.
Set the maximum number of hops to the target
Max Hops
address.
Timeout Maximum waiting time in seconds.
Type Set ICMP or UDP.
Select the tick-box to include hop names (if
Name Lookup supported) in the results. (This will cause the test
to take more time to complete.)
2. Select the desired option.
3. Select the desired test parameters or enter the desired information with the
alphanumeric keys.
4. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
T-Route 6 (Trace Route IPv6)
This menu allows settings to be made for the IPv6 trace route test.
1. Select the menu point "T-Route6".
Option Description
Select the target address to which the ping is to
Target be sent. Use the option ... to select the list with
the target addresses you have saved.
Set the maximum number of hops to the target
Max Hops
address.
Timeout Maximum waiting time in seconds.
Type Set ICMP or UDP.
Select the tick-box to include hop names (if
Name Lookup supported) in the results. (This will cause the test
to take more time to complete.)
2. Select the desired option.
3. Select the desired test parameters or enter the desired information with the
alphanumeric keys.
4. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
LanXPLORER Pro
User Manual
Figure 35: Trace Route4
Figure 36: Trace Route6
150835 Iss 5
Page 24