Charging Rechargeable Batteries; Removing / Installing Rechargeable Batteries; Battery Pack - IDEAL Networks LanXPLORER Pro Manual

2.2.2

Charging rechargeable batteries

NOTE:
The charging time depends on the charge level of the batteries.

Battery pack

The battery pack for the LanXPLORER can be charged in the LanXPLORER using the
charger/power pack. A time of approximately 8 hours is required to completely charge the
battery pack in the instrument.
Rechargeable AA batteries (optional)
It is necessary to charge rechargeable AA batteries externally with a charger. They cannot be
charged in the LanXPLORER.
2.2.3

Removing / installing rechargeable batteries

When the batteries are removed the LanXPLORER saves the data and settings in the battery-
buffered flash ROM.
1. Open the kick stand.
2. Remove the battery cover.
CAUTION!
The battery pack or battery holder is connected to the LanXPLORER with a cable. When
removing the batteries, do not pull on the cable - damage to instrument and connector could
occur.
1. Remove the battery pack or battery holder.
2. Detach the connector for the battery pack or
battery holder from the instrument.
3. If applicable, remove the batteries from the
battery holder.
Install batteries in opposite order.
LanXPLORER Pro
User Manual
Figure 5: Changing batteries
Figure 6: Removing batteries
150835 Iss 5
Page 12