Battery Charging - IDEAL Networks LanTEK III Manual

2.3.2

Battery Charging

The batteries of the Display (DH) and Remote (RH) handset are charged using the adapter.
It takes approximately 6-8 hours until the batteries in the instrument are fully charged. If the
batteries are charged externally, charge time is approximately 4 hours.
During recharging, the instrument is calibrated to the corresponding battery. This ensures
an accurate indication of the charge state at all times.
NOTE:
Charge time depends on charge state of battery.
When the battery is removed, the Display handset (DH) data and preferences are preserved
in the flash ROM by a coin cell lithium battery.
2.4 Talkset
The LanTEK III Cable Certifier is designed for use with a talkset. This function allows
®
communication between the Display (DH) and Remote (RH) handset through an externally
attached microphone/headset. For this purpose, the Display (DH) and Remote (RH)
handset must be connected to the test adapters through a cable.
LanTEK III 161809 Iss 2
User Manual Page16