Remote Operation Of The Machine - Sharp MX-2630N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

REMOTE OPERATION OF THE MACHINE

Remotely operate the machine on your computer.
You can operate the machine from the same panel as the machine's operation panel that is displayed on your PC, with
the same feel as operating in front of the machine.
Easy HDD LINE PRINTER
Sharp OSA Job Status
Scan File retrieve
No. of copies 1 Send as well as print
Colour Mode Quick File
7 8 9
Full Colour Store Data Temporarily
File
Original
Store Data in Folder
Auto A4 4 5 6
Paper Select Call Eco Program
1 2 3
Auto
2-Sided Copy
1-Sided→1-Sided 0 C
Copy Ratio
100%
Exposure
Preview CA
Auto Plain
Sort/Group A4
Auto 1 A4
2 B5 B/W Colour
3 B4
Others Start Start
4 A3
Operate the machine
using your computer
screen.
The remote operation function can only be used on one computer at a time.
Before you can use the remote operation function, the following preparation is required.
• In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition
Settings] → [Remote Operation Settings] → [Remote Software Operation] and select [Allow] for [Operational Authority].
• Connect the machine to the network.
• Install a VNC application software (recommended VNC software: RealVNC) in your computer.
After the preparation is completed, follow the operation described below to set up the function.
Example: RealVNC
1
Check with the administrator of the machine for its IP address.
Follow the message on the operation panel of the machine to permit the
2
connection.
When the machine is connected to a VNC application software,
If you wish to disconnect, exit the VNC application software or tap
Use the operation panel in the same way as you would on the machine. However, you cannot enter values in series by
continuously clicking the key.
Your computer
1-57
LINE PRINTER
Easy HDD Sharp OSA Job Status
Scan File retrieve
No. of copies 1 Send as well as print
Colour Mode Quick File
7 8 9 Store Data Temporarily
Full Colour
File
Original
Auto A4 4 5 6 Store Data in Folder
Call Eco Program
Paper Select
Auto 1 2 3
2-Sided Copy
1-Sided→1-Sided 0 C
Copy Ratio
100%
Exposure Preview CA
Auto Plain
A4
Sort/Group
Auto
1 A4
2 B5
3 B4 B/W Colour
Others 4 A3 Start Start
Operation panel
Network
Start the VNC viewer, enter the IP
address of the machine in the "VNC
Server" entry box, and click the
[Connect] button.
appears on the system bar of the machine's touch panel.
.
The machine